micro:bit Workshop Kit

$99.00

The Inventor’s Kit for the micro:bit is a great way to get started with programming and hardware interaction with the micro:bit. This Inventor’s Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors.

To get you off to a flying start, an included, easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don’t need any experience with programming as the tutorial book will guide you every step of the way. You’ll be programming and creating circuits in no time!

Free 1 x hour end user training

The Inventor’s Kit for the micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The micro:bit has a selection of pins that are located on the bottom edge of its Printed Circuit Board (PCB). By using the specially designed Edge Connector Board for the micro:bit in conjunction with the breadboard (see below), it is easy to use these pins to connect additional components to the micro:bit.

No soldering is required and you can build your first circuit in minutes!

Note:

  • This kit requires assembly.
  • Pricing includes one micro:bit

Features:

  • No soldering required – build your first circuit in minutes!
  • Make 10 experiments included in the provided step-by-step tutorial book
  • All parts are included to conduct the 10 experiments
  • Breaks out 21 accessible pins from the micro:bit using the Edge Connector Board for the micro:bit
  • Small Prototype Breadboard included for fast prototyping

Contents:

  • 1 x Perspex Mounting Plate.
  • 1 x Potentiometer & Finger Adjust Spindle.
  • 2 x Plastic Spacer 10mm.
  • 1 x Sticky Fixer for Battery Pack.
  • 1 x Small Prototype Breadboard.
  • 1 x Terminal Connector.
  • 4 x Push Switch.
  • 1 x Motor.
  • 1 x Transistor.
  • 2 x Red 5mm LED.
  • 2 x Orange 5mm LED.
  • 2 x Yellow 5mm LED.
  • 2 x Green 5mm LED.
  • 1 x RGB 5mm LED.
  • 1 x Fan Blade.
  • 5 x 2.2KΩ Resistor.
  • 5 x 10KΩ Resistor.
  • 5 x 47Ω Resistor.
  • 1 x Edge Connector Breakout Board for micro:bit.
  • 1 x Miniature LDR.
  • 10 x Male to Male Jumper Wires.
  • 10 x Male to Female Jumper Wires.
  • 4 x Self-adhesive Rubber Feet.
  • 1 x 470uF Electrolytic Capacitor.
  • 1 x Piezo Element Buzzer.
  • 4 x Pan Head M3 Machine Screw.
  • 1 x microbit:bit